3R,Power,Patio, Lawn Garden , Generators Portable Power , Generator Accessories,R,desithrill.com,to,Inlet,7,500,Box,,NEMA,/Anthropidae36301.html,Up,$30,Generators,BANBLUE,30-Amp BANBLUE 30-Amp NEMA 3R Power trust Inlet Box R Up to Generators 500 7 3R,Power,Patio, Lawn Garden , Generators Portable Power , Generator Accessories,R,desithrill.com,to,Inlet,7,500,Box,,NEMA,/Anthropidae36301.html,Up,$30,Generators,BANBLUE,30-Amp $30 BANBLUE 30-Amp NEMA 3R Power Inlet Box, Generators Up to 7,500 R Patio, Lawn Garden Generators Portable Power Generator Accessories BANBLUE 30-Amp NEMA 3R Power trust Inlet Box R Up to Generators 500 7 $30 BANBLUE 30-Amp NEMA 3R Power Inlet Box, Generators Up to 7,500 R Patio, Lawn Garden Generators Portable Power Generator Accessories

BANBLUE 30-Amp NEMA 3R Power trust Inlet Box R Up to Generators 500 OFFicial site 7

BANBLUE 30-Amp NEMA 3R Power Inlet Box, Generators Up to 7,500 R

$30

BANBLUE 30-Amp NEMA 3R Power Inlet Box, Generators Up to 7,500 R

|||

Product description

Power Inlet Box

Desc: 30A 125/250V
NEMA: L14-30P

WARNING:
The inlet is not to be connected to power prior to installation.

IMPORTANT:
Installation of this power inlet box and related wiring must be done by a qualified electrician in compliance with all applicable electrical codes.
When being used to power a structure, this inlet must be used in conjunction with a transfer switch. Not for indoor use. When using an engine driven generator,
locate away from doors and windows to avoid the build-up of carbon monoxide from the engine exhaust in enclosed areas.

Installing the Power Inlet Box
Mount the power inlet box on the outside of the building in a convenient location, using the three holes provided in the back of the cabinet.
Using copper wire only and approved wiringmethods, run the wiring through one of the knockouts in the cabinet to a junction box located near the transfer switch.
If using conduit, pul at least four colors. Max Wire Gauge:10AWG Strip the wire insulation 3/5"(15mm, turn back to see the picture of "FIG1") (do not tin conductors)
and connect the wires in the power inlet box as fllows. Making sure there is no wire insulation in any terminal and the inlet terminal screws are tightened to 35 inch-pounds torque using Electric Phillips screwdriver.

Cable Color Scheme:
Black/Red=Load (250 Volt),the terminals marked“X”and "Y”
White=W-Neutral Conductor connected to "White' 'marking terminal.
Green=Green power inlet wire to green ground screw terminal on inside of cabinet.
If required, green wire to green ground screw terminal on inside of cabint. (turn back to see the picture of "FIG2")

BANBLUE 30-Amp NEMA 3R Power Inlet Box, Generators Up to 7,500 R